Which RPM profile file do I download for my device?

There is now one RPM profile and it fits every device. You no longer pick a file to match your LED layout. There is no 5-10-5, no 4-10-4, no 3-9-3 and no X-10-X file to choose between. Take the RPM telemetry profile and install it.

Then tell the plugin how wide your centre is. On LED Devices > RPM Telemetry > Configuration, set Number of centre LEDs: the long run of rev lights in the middle of the device, so 10 for a device laid out 3-10-3. The shift points for the car you are driving are fitted to whatever you pick, which is why one profile now suits every device.

Your side LEDs are worked out for you. Installing the profile reads that device's strip and fills in Number of side LEDs (per side), because a strip total and a centre width only leave one answer. You rarely need to touch it.

If your device has no centre run at all, set the centre to 0. That is a width like any other, not a different profile.

⭐ Every LED device can run it, up to 16 of them. Give each device its own centre width and its own job. It is still worth setting a second device to brake pressure or the fuel gauge rather than repeating rev lights you can already see.

Already running an older profile? There is nothing to redo. An older DNR profile on your device finds what replaced it, and the devices that used to need their own RPM file arrive set up.